Fixing A Pocket Door

A step by step guide on how I repaired this pocket door that had come off one of its rollers. 1 Remove both stops from the head jamb and from one side jamb so that you can lift the door out.

How To Maintain And Fix Sliding Doors Dummies

To fix a pocket door that has gone off track break the seal on the door jamb with a knife.

Fixing a pocket door. Use a pocket door wrench to turn the hanger a quarter of a turn at a time until the door is parallel with the jamb. If the door isnt level leaving a gap between the door and frame then adjust the door hardware. And instead of hinges pocket door relies on rollers to open or close the door.

If the door is scraping against the floor turn the adjustment screw so that it pulls the door upward. Remove the pocket door. To fix a pocket door off track determine first how the door managed to free itself in the first place.

To do this youll need to remove some of the casingmolding around the door and possibly the door frame itself. Get Results from 6 Engines at Once. Tap some shims under the door to hold it about 14 off the floor.

Pull out a door thats stuck in the pocket by alternately pulling the top and bottom edges. If they are you will need to remove the door to diagnose the problem. Ad Search Installation Of Door.

Take off the stop moldings on the door jamb with a chisel. To adjust a pocket door you need to know the problem. Get Results from 6 Engines at Once.

You will probably have to climb on both sides of the door to get all the cylinders. Emphasis is placed on how to. Ad Search Installation Of Door.

With a cloth in hand spray the rollers wisely with lubricants. Slide the pocket side hanger to where it is about six to eight inches from the edge of the jamb. So in this article we have focused on those problems that happen.

Sometimes the hardest part is getting the door out of the pocket or off the track. Locate the slanted screw mechanism on top of the door just inside the recess area. Most pocket doors have four rollers per hook.

Check the upper door hangers for signs of damage before cleaning the door tracks retrieve the door from the inner pocket if needed and check the doors latch and wheels before reattaching. I hope this video empowers the handyman inside you to tackle th. Pry off the door stops with a stiff putty knife.

Several problems can manifest themselves although none are in general difficult to deal with. Closely check the rollers to ensure they are not broken. Place the pocket door in the middle of the doorway.

Check that theyre fitted into the track properly. If the door is off track pull the door out and re-attach. Lastly the track could be warped and need a whole system replacement.

With a pocket door you want to attach the hanger that is closest to the pocket side of the door. Diagnosing Pocket Door Problems To diagnose the damage and identify the problem thats keeping your door from operating smoothly the first thing youll need to do is remove the door itself. If you have a gap at the bottom of the door that is causing rubbing towards the top of your door you can lower the door by adjusting the hanger that is positioned the furthest away from the door latch.

How to fix a pocket door Read More. Swing the door from side to side until the rollers move smoothly. Remove the roller from the overhead track.

When a pocket door doesnt work right the problem is often with the rollers. You will need to angle the door so that the strike side is out of the opening. Mainly the problems that occur are related to the alignment or not closing properly.

Add a little spray as needed until you are satisfied with the process. The basic design and structure of a pocket door is shown with details of how to repair a door that has slipped off its track. PFor a pocket door you dont need to deal with the swinging the door.

10 Steps To Fix A Pocket Door